For mountaineering, skiing or any other active mountain sports, this next-gen insulated jacket delivers on warmth, stretchiness for ease of wear and comfort while remaining lightweight. With its lightweight, wind-resistant and extremely wear-resistant TORAY® AIR STRETCH shell, the K BELAY HOODIE features new POLARTEC® POWER FILL padding. This warm new padding traps the maximum amount of air through a fusion process, which boosts thermal performance in low temperatures. The fibre matrix thus formed stores up the body heat you release, forming a layer of air between your body and the outside that remains equalised. Worn as a second layer in winter or worn all on its own in mild weather, this is an insulated jacket with a sports-specific design that frees up movement in action and dries quickly.Properties
Close fitting all over the body, and sightly tighter in the lower section for greater streamlining and thus higher performance during exertion. Often used with stretch fabrics for enhanced comfort.
LOW IMPACT is a unique standard based on two essential eco-design criteria : eco-friendly material (at least 40% of the product weight must use eco-friendly material), and certifications (at least 80% of the product weight must be BLUESIGN® approved).
Durable comfort in the cold. Polartec® Power Fill™ is one of the latest insulation innovations made from an industry-leading 80% post-consumer recycled (PCR) content. This proprietary platform provides greater warmth retention in colder conditions, without added weight or bulk – ideal for a variety of activities where body heat can’t ensure proper warmth. A unique controlled melt process bonds the hollow fibers, increasing durability and drapability, reducing the need for scrims or other stabilizers. This gives Power Fill™ unmatched warmth and design versatility, perfect for a wide range of style and usage occasions.
Toray Airtastic fabrics are extremely lightweight and resistant to abrasion. The resulting highly packable products will be your companion during active outdoor pastimes such as ski touring and hiking.
- Adjustable, ergonomic hood
- Performance and compressibility of Polartec® Powerfill™ insulation
- Handwarmer pockets, useable with harness
- Inside security pocket
- Double-slider zip closure, adjustable hem
- Main Fabrics :TORAY® AIR STRETCH RIP STOP // 100% POLYAMIDE
- Insulation : POLARTEC® POWERFILL 100 INSULATION RECYCLED // 80% RECYCLED POLYESTER 20% POLYESTER
- Insulation : POLARTEC® POWERFILL 80 INSULATION RECYCLED // 80% RECYCLED POLYESTER 20% POLYESTER
- Lining : ULTRALIGHT DOWNPROOF // 100% POLYAMIDE
- 420 g
Millet products are not just designed to last, they are also easy to maintain. Careful use and regular upkeep will guarantee the best results out of your products and will extend their life.
In case of doubt, always refer to the instructions written on the label of your product.
SHOES AND CLIMBING SHOES
- Millet shoes should be washed in water and by hand using a soft brush or a sponge.
- Above all, never put your shoes into either a washing machine or a dryer.
- Drying should be done naturally.
- Millet backpacks should be washed in water and by hand using a soft brush or a sponge.
- Above all, never put your backpack into either a washing machine or a dryer.
- Drying should be done in the open air.
- Caring for a rope is critical in order to guarantee optimal safety when it is used.
- To wash a rope, it is necessary to use clean, warm water (temperature less than 30°C) and a non-aggressive detergent (such as a liquid Marseille soap-type detergent or a detergent for delicate textiles). If necessary, brush it with a soft brush.
- Drying should be done in the shade and away from any source of heat.
- Store your rope in a dry place, out of the reach of the sun.
- Air out your Millet sleeping bag regularly to give it back a bit of freshness and to make sure the bag is completely dry before storing it away.
- For sleeping bags that do not contain down, general washing and drying instructions apply.
- For sleeping bags that do contain down, please see the section “Products Containing Down,” below.
PRODUCTS CONTAINING DOWN
- When dealing with products containing down (100% or hybrid), machine washing is done using a delicate program with a special down detergent or a non-aggressive detergent, along with tennis balls placed in the wash to prevent the down from sticking together. If there is too much detergent left over, run the rinsing program again by itself. Do not put the product through the washing machine's spin cycle.
- Drying may be done flat in the open air, turning over the product regularly to dry it well, or in a tumble dryer on a delicate program.
- Millet clothing must be machine washed at 30°C, and machine dried using a low-temperature program. To guarantee optimal washing without degrading the product, close up all velcro closures, snap fastenings and zippers, and loosen elastic drawstrings before putting clothing in the machine.
CLOTHING WITH WATERPROOF MATERIALS
- This is the case particularly for the following materials: Gore-Tex, Polartec Neoshell, Dryedge, Windstopper, Element Shield
- After closing the velcro fastenings, zippers and snap fastenings, wash your product at 30°C with a bit of non-aggressive detergent or a special detergent for waterproof materials. If there is too much detergent left over, run a rinsing program again by itself. Drying should be done in the open air or in a tumble dryer at low temperature.
- It is possible to use a specific product to re-waterproof your product or to give it back water repellency.