Description of LD TRILOGY V ICON GTX PRO JKTThe V Icon is the ultimate combination of resistance, lightweight and function in the Trilogy Series and delivers high performance with a light weight, abrasion resistance and a full pack of functions .The Alpine Fit™ reduces bulk around the body and gives enough room for unrestricted movement and the raglan sleeves pattern design enhances durability at high wear areas by reducing abrasion points particularly vulnerable to wear from pack straps. The articulated pattern design allows a great deal of elbow room. The Gore-Tex® Pro Astree 3L shell fabric uses a revolutionary multi-layer membrane system comprising a single microstructure. The Gore-Tex® PTFE membrane is laminated between a durable, extremely tough outer and a ripstop polyamide inner that is also very robust. The result: superior strength and accelerated breathability to deliver solid, durable protection. It is totally windproof and more breathable than previous constructions, while the jacket's design allows to gauge inside air circulation with underarm vents. The Aquaguard zippers keep water outside of your jacket and the drainage system at the chest pockets assures you won't be surprised with wet gloves or a soaked map and heavy, water-filled pockets. To protect your devices or other precious items, stow them in the interior pocket. Chest pockets sit high for accessibility and are pack and harness-compatible, so is the 2-way zipper front closure that allows you to grab and quickly put on or take off your jacket without touching your harness. With an adjustable and helmet compatible hood, the V Icon is deal for mountaineering and climbing on rock and ice adventures. Trilogy gets its name from the challenge Éric Escoffier and Christophe Profit, mountaineers from the MILLET team, had set: A solo peak bagging winter ramble of the three North faces (Eiger, Cervin, Jorasses).In the field of mountaineering equipment, Trilogy is the quintessence of alpine performance. This summer, the Trilogy series delivers high performance with streamlined designs and one goal in mind: light weight and energy efficiency.
- Athletic fit, Flex Comfort™ build
- Lightweight mountaineering hood: helmet-compatible, adjustable
- 2 large, zipped, quick-access chest pockets
- Zipped inside pocket
- Pit zip vents
- Double-slider zip closure; adjustable hem, collar and cuffs
- Goretex® Pro Astree 3L
- Waterproofness 28 000mm - Breathability RET < 6 m²Pa/W
- 100% Polyamide
- 400 gr
Millet products are not just designed to last, they are also easy to maintain. Careful use and regular upkeep will guarantee the best results out of your products and will extend their life.
In case of doubt, always refer to the instructions written on the label of your product.
SHOES AND CLIMBING SHOES
- Millet shoes should be washed in water and by hand using a soft brush or a sponge.
- Above all, never put your shoes into either a washing machine or a dryer.
- Drying should be done naturally.
- Millet backpacks should be washed in water and by hand using a soft brush or a sponge.
- Above all, never put your backpack into either a washing machine or a dryer.
- Drying should be done in the open air.
- Caring for a rope is critical in order to guarantee optimal safety when it is used.
- To wash a rope, it is necessary to use clean, warm water (temperature less than 30°C) and a non-aggressive detergent (such as a liquid Marseille soap-type detergent or a detergent for delicate textiles). If necessary, brush it with a soft brush.
- Drying should be done in the shade and away from any source of heat.
- Store your rope in a dry place, out of the reach of the sun.
- Air out your Millet sleeping bag regularly to give it back a bit of freshness and to make sure the bag is completely dry before storing it away.
- For sleeping bags that do not contain down, general washing and drying instructions apply.
- For sleeping bags that do contain down, please see the section “Products Containing Down,” below.
PRODUCTS CONTAINING DOWN
- When dealing with products containing down (100% or hybrid), machine washing is done using a delicate program with a special down detergent or a non-aggressive detergent, along with tennis balls placed in the wash to prevent the down from sticking together. If there is too much detergent left over, run the rinsing program again by itself. Do not put the product through the washing machine's spin cycle.
- Drying may be done flat in the open air, turning over the product regularly to dry it well, or in a tumble dryer on a delicate program.
- Millet clothing must be machine washed at 30°C, and machine dried using a low-temperature program. To guarantee optimal washing without degrading the product, close up all velcro closures, snap fastenings and zippers, and loosen elastic drawstrings before putting clothing in the machine.
CLOTHING WITH WATERPROOF MATERIALS
- This is the case particularly for the following materials: Gore-Tex, Polartec Neoshell, Dryedge, Windstopper, Element Shield
- After closing the velcro fastenings, zippers and snap fastenings, wash your product at 30°C with a bit of non-aggressive detergent or a special detergent for waterproof materials. If there is too much detergent left over, run a rinsing program again by itself. Drying should be done in the open air or in a tumble dryer at low temperature.
- It is possible to use a specific product to re-waterproof your product or to give it back water repellency.
Measure your size
- 1. Measure around your chest: measure around your chest at the widest point, making sure to keep the tape measure properly horizontal
Please see the sizing chart
Your measurements Chest (CM) 80-64 84-90 90-96 96-102 102-108 Size to order XS S M L XL Tailles équivalentes FR 34 36-38 40 42-44 46 US XS S M L XL DE 32 34-36 38 40-42 44 UK 6 8-10 12 14-16 18 IT 38 40-42 44 46-48 50 JP S M L XL XXL CN 160/82Y 165/88Y 170/94Y 170/100Y 175/106Y
Works for any intense activity. This strikes the balance between free movement and comfort. The design delivers comfort and protection.
Flex Confort construction
Flex Comfort is a construction that maximizes the benefits of each material to bring absolute freedom of movement. Flexible inserts are introduced in the garment design in order to give it optimal ergonomics.
Made of highly breathable and abrasion resistant fabrics for a variety of weather conditions. GORE-TEX® products serve pure practitioners as well as keen adventurers with the best products.
Helmet compatible hood
Helmet-compatible hood is large enough to fit in your head protection. The hood secures easily and delivers an ergonomic, full coverage, without requiring to remove your helmet.