glass
New collection

Men's wind resistant pant - mountaineering - navy-blue SUMMIT 200 XCS PANT

 
  • Stretchy
  • Very durable
  • Warm
The fit of this product is normal. Take your usual size.
Buy online with a partner
SUMMIT 200 XCS PANT
Men's wind resistant pant - mountaineering - navy-blue SUMMIT 200 XCS PANT
€9,999.00
Descriptive
Designed to take on the elements and form a barrier against the wind, these active stretch trousers are ideal for 3-season mountain climbing and multiple cold-weather activities. Designed for all serious alpine excursions and those who climb on a regular basis, these SUMMIT 200 XCS technical trousers keep you insulated from the cold thanks to their warm, brushed interior, which is structured to wick moisture swiftly away from your body and keep you in the comfort zone. In terms of rocks and ridges, the maximum wear-resistance of the knees is very welcome. These are fully reinforced with SCHOELLER® DYNAMIC™ which has the advantage of giving you durability and toughness without compromising on flexibility. For sports hikes, climbing or mountaineering, these softshell trousers are comfortably stretchy with great freedom of movement as well as benefiting from a preformed, fitted design for reducing restrictions as much as possible while you are up in the mountains. The zipped ankles on these mountaineering trousers are designed for you to slip them on easily over boots and for precision on the slopes.
Properties
    • 0
    • 1
    • 2
    • 3
    • 4
    • 5
  • breathability
  • durable
  • heat
  • stretch
  • windproof
Technical informations
  • Active Fit
    Active Fit

    Close fitting all over the body, and sightly tighter in the lower section for greater streamlining and thus higher performance during exertion. Often used with stretch fabrics for enhanced comfort.

  • Low Impact
    Low Impact

    LOW IMPACT is a unique standard based on two essential eco-design criteria : eco-friendly material (at least 40% of the product weight must use eco-friendly material), and certifications (at least 80% of the product weight must be BLUESIGN® approved).

  • SCHOELLER
    SCHOELLER

    Schoeller Keprotec is made of high quality material. This fabric utilizes Kevlar, an fiber that is stronger than steel at equal weight: Schoeller garments offer outstanding abrasion and cutting resistance.

  • XCS 200
    XCS 200

    High-performance and two-sided in construction, XCS 200 assures maximum resistance to abrasion and wicks aways moisture as well as guaranteeing enhanced comfort and faster drying. Water repellent, breathable, strong and light - an ideal response for active mountain sports.

SPECIFICATIONS

  • Adjustable waistband with loops
  • 2 zipped handwarmer pockets
  • Preshaped knees with Schoeller® reinforcements
  • Cuff zips

FABRICS

  • Fabrics : X.C.S. 200™ // 92% POLYAMIDE 8% ELASTANE
  • Reinforcement : SCHOELLER® DYNAMIC REINFORCEMENT // // 60% POLYAMIDE 31% POLYESTER 9% ELASTANE

WEIGHT

  • 420 gr

Activities

  • Alpinism
  • Approach
  • Climbing

Reference

  • MIV8004_7413
Care

Millet products are not just designed to last, they are also easy to maintain.  Careful use and regular upkeep will guarantee the best results out of your products and will extend their life.

 

In case of doubt, always refer to the instructions written on the label of your product.

 

SHOES AND CLIMBING SHOES

  • Millet shoes should be washed in water and by hand using a soft brush or a sponge.
  • Above all, never put your shoes into either a washing machine or a dryer.
  • Drying should be done naturally.

 

BACKPACKS

  • Millet backpacks should be washed in water and by hand using a soft brush or a sponge.
  • Above all, never put your backpack into either a washing machine or a dryer.
  • Drying should be done in the open air.

 

ROPES

  • Caring for a rope is critical in order to guarantee optimal safety when it is used.
  • To wash a rope, it is necessary to use clean, warm water (temperature less than 30°C) and a non-aggressive detergent (such as a liquid Marseille soap-type detergent or a detergent for delicate textiles).  If necessary, brush it with a soft brush.
  • Drying should be done in the shade and away from any source of heat.
  • Store your rope in a dry place, out of the reach of the sun.

 

SLEEPING BAGS

  • Air out your Millet sleeping bag regularly to give it back a bit of freshness and to make sure the bag is completely dry before storing it away.
  • For sleeping bags that do not contain down, general washing and drying instructions apply.
  • For sleeping bags that do contain down, please see the section “Products Containing Down,” below.

 

PRODUCTS CONTAINING DOWN

  • When dealing with products containing down (100% or hybrid), machine washing is done using a delicate program with a special down detergent or a non-aggressive detergent, along with tennis balls placed in the wash to prevent the down from sticking together.  If there is too much detergent left over, run the rinsing program again by itself.  Do not put the product through the washing machine's spin cycle.
  • Drying may be done flat in the open air, turning over the product regularly to dry it well, or in a tumble dryer on a delicate program.

 

CLOTHING

  • Millet clothing must be machine washed at 30°C, and machine dried using a low-temperature program.  To guarantee optimal washing without degrading the product, close up all velcro closures, snap fastenings and zippers, and loosen elastic drawstrings before putting clothing in the machine.

 

CLOTHING WITH WATERPROOF MATERIALS

  • This is the case particularly for the following materials: Gore-Tex, Polartec Neoshell, Dryedge, Windstopper, Element Shield
  • After closing the velcro fastenings, zippers and snap fastenings, wash your product at 30°C with a bit of non-aggressive detergent or a special detergent for waterproof materials.  If there is too much detergent left over, run a rinsing program again by itself.  Drying should be done in the open air or in a tumble dryer at low temperature.
  • It is possible to use a specific product to re-waterproof your product or to give it back water repellency.