What is preordering?

Preordering is a service that lets our customers order a product that is not in stock yet but soon will be.

The product paid for when ordered is reserved, and then shipped on the date shown below the selected size. 

Find out more

Men's lightweight jacket - ski touring - navy-blue TOURING SPEED XCS HOODIE

€199.95
  • Thermal regulation
  • Ultra-light
  • Water-repellent
  • Marine
  • Orange
  • Blue
  • Marine
  • Marine
  • Red
The fit of this product is normal. Take your usual size.
  • Free standard delivery
  • Exchange and return within 30 days
Availability alert OK
Buy online from a partner
TOURING SPEED XCS HOODIE
Men's lightweight jacket - ski touring - navy-blue TOURING SPEED XCS HOODIE
€199.95
Description
Built for ski touring and intense activity, this ultra-light jacket is breathable and provides thermal regulation. To enjoy the high intensity uphill as well as the fast and fluid ride down the hill, the TOURING SPEED XCS HOODIE combines a water-repellent, highly resistant stretch nylon shell and stretch TORAY® front panel with a moisture wicking back. Chosen by the U.S. Military for its great adaptability in action, the POLARTEC®ALPHA® insulation is used here on the front panel and is the most breathable fleece available. No need to add or remove a layer on your way up anymore, as this one provides the ideal level of thermal insulation, whichever state you are engaged in: active or static.
Properties
    • 0
    • 1
    • 2
    • 3
    • 4
    • 5
  • breathability
  • durable
  • heat
  • stretch
  • windproof
Technical information
  • Active Fit
    Active Fit

    Close fitting all over the body, and sightly tighter in the lower section for greater streamlining and thus higher performance during exertion. Often used with stretch fabrics for enhanced comfort.

  • Dual Tech construction
    Dual Tech construction

    The combination of complementary materials in a manner that maximizes the benefits of each and enhances the functionality of the product, for an improved abrasion resistance, mobility and moisture management.

  • Low Impact
    Low Impact

    LOW IMPACT is a unique standard based on two essential eco-design criteria : eco-friendly material (at least 40% of the product weight must use eco-friendly material), and certifications (at least 80% of the product weight must be BLUESIGN® approved).

  • Polartec Alpha
    Polartec Alpha

    Polartec Alpha fabrics are built for intense activities and deliver high performance insulation. A Polartec Alpha garment can be worn in a layering system, for insulation, and as stand-alone piece, as it allows outstanding breathability, comfort and is quick drying. It is perfect for mountaineering, ski and ice climbing.

  • Toray Airtastic
    Toray Airtastic

    Toray Airtastic fabrics are extremely lightweight and resistant to abrasion. The resulting highly packable products will be your companion during active outdoor pastimes such as ski touring and hiking.

  • XCS 100
    XCS 100

    Known for its abrasion resistance properties, XCS100™ is perfectly adapted to the vertical world. With a 4-way stretch, two-sided high density nylon structure and durable water repellant, it is comfortable, moisture wicking, water resistant and perfect for the mountain!

SPECIFICATIONS

  • Hybrid build for insulation and stretch
  • Athletic fit
  • Integral hood with protective visor
  • 2 zipped upper pockets and 1 zipped chest pocket
  • Center zip closure, hem drawcord, thumbhole cuffs
  • Hi-vis markings

FABRICS

  • Fabrics : X.C.S. 100™ // 88% POLYAMIDE 12% ELASTANE
  • Fabrics : TORAY® AIR STRETCH RIP STOP // // 100% POLYAMIDE
  • Insulation : POLARTEC® ALPHA 80 // // 100% RECYCLED POLYESTER

WEIGHT

  • 455 gr

Activities

  • Ski touring

Product reference

  • MIV8062_7413
Care

Millet products are not just designed to last, they are also easy to maintain.  Careful use and regular upkeep will guarantee the best results out of your products and will extend their life.

 

In case of doubt, always refer to the instructions written on the label of your product.

 

SHOES AND CLIMBING SHOES

  • Millet shoes should be washed in water and by hand using a soft brush or a sponge.
  • Above all, never put your shoes into either a washing machine or a dryer.
  • Drying should be done naturally.

 

BACKPACKS

  • Millet backpacks should be washed in water and by hand using a soft brush or a sponge.
  • Above all, never put your backpack into either a washing machine or a dryer.
  • Drying should be done in the open air.

 

ROPES

  • Caring for a rope is critical in order to guarantee optimal safety when it is used.
  • To wash a rope, it is necessary to use clean, warm water (temperature less than 30°C) and a non-aggressive detergent (such as a liquid Marseille soap-type detergent or a detergent for delicate textiles).  If necessary, brush it with a soft brush.
  • Drying should be done in the shade and away from any source of heat.
  • Store your rope in a dry place, out of the reach of the sun.

 

SLEEPING BAGS

  • Air out your Millet sleeping bag regularly to give it back a bit of freshness and to make sure the bag is completely dry before storing it away.
  • For sleeping bags that do not contain down, general washing and drying instructions apply.
  • For sleeping bags that do contain down, please see the section “Products Containing Down,” below.

 

PRODUCTS CONTAINING DOWN

  • When dealing with products containing down (100% or hybrid), machine washing is done using a delicate program with a special down detergent or a non-aggressive detergent, along with tennis balls placed in the wash to prevent the down from sticking together.  If there is too much detergent left over, run the rinsing program again by itself.  Do not put the product through the washing machine's spin cycle.
  • Drying may be done flat in the open air, turning over the product regularly to dry it well, or in a tumble dryer on a delicate program.

 

CLOTHING

  • Millet clothing must be machine washed at 30°C, and machine dried using a low-temperature program.  To guarantee optimal washing without degrading the product, close up all velcro closures, snap fastenings and zippers, and loosen elastic drawstrings before putting clothing in the machine.

 

CLOTHING WITH WATERPROOF MATERIALS

  • This is the case particularly for the following materials: Gore-Tex, Polartec Neoshell, Dryedge, Windstopper, Element Shield
  • After closing the velcro fastenings, zippers and snap fastenings, wash your product at 30°C with a bit of non-aggressive detergent or a special detergent for waterproof materials.  If there is too much detergent left over, run a rinsing program again by itself.  Drying should be done in the open air or in a tumble dryer at low temperature.
  • It is possible to use a specific product to re-waterproof your product or to give it back water repellency.